Archives for category: Finished project

For some reason I have not been able to get into my blog in the last few weeks. Time has been pretty tight, and on the odd few occasions when I’ve tried to blog, it just wouldn’t work. Frustrating!

This is one of the things I’ve worked on and finally finished. It needed sequins and beads, lining and cording.

I used two different size gold sequins put randomly around the embroidery. I seen one or two others finished and realised that I needed to keep the sequins in quite tight to fit them on the front and to keep them away from the seam at the bottom.

IMG_3256

A selection of beads in the same  and toning colours as the stitching were used to anchor the sequins down.

IMG_3257

This lemon printed fabric came with the kit for the lining.

IMG_3484

Much as I like it, it wasn’t right with the colours of the embroidery and the design was too large.

The burgundy and gold from my rose window quilt worked much better. I used the burgundy for the french knots and beads for the flower centre.

IMG_3485

The embroidered piece was machine stitched to the lining with right sides together, leaving a small gap for turning through on one side which was hand stitched. The two sides were hand stitching together to make the back seam.

The same burgundy stranded cotton was used for  cording that edged the seams across the top and down the back.

IMG_3483

Detail of the corded back seam.

IMG_3481

The finished scissor keeper. The end of the cord made a tiny tassel at the bottom.

IMG_3482

 

 

 

This carpet is the reason I didn’t continue work on the canvas work for eight dining chairs when we moved here in 1990. As you can see the colours were totally wrong , not to mention the pattern. Its proved very serviceable  over the years, red wine, and small children, but it really wouldn’t have been my (our choice), but it was far to good to change.

20140716-162620-59180572.jpg

But the colours go beautifully in the lounge now. So when I found it while sorting out last back end I decided the time had come to finish it. If you are new to my blog you can go back and look at where I started re-working it.

20140716-162621-59181132.jpg

I got so carried away once I started the final stage I forgot to take photos until I’d got the first two sides on. The learning curve was a bit steep as usual as the canvas work is not quite a square (15 inches in one direction and 16 in the other). I wanted the overall cushion to be about 22 inches square (to fit the pad I already had – 26 inch feather cushion – I like my cushions plump and squishy).

20140716-162621-59181405.jpg

On the photo above the four horizontal stripes were already done when I started re-working it. And although I found most of the original yarns, these have disappeared, used for other projects(?) in the long interim. (I’ll probably find them now it’s finished!). I did pull out some of the original work (the shape of the finished piece had to be different) out but wanted to retain as much of the original as possible.

20140716-162621-59181683.jpg

The fabric is brown denim and has a definite nap which I used to effect. I realised that if I put the short pieces on the longest sides and the long strips on the short going the whole length of the fabric and canvas work with the nap going in the same direction, it would optically make it look square overall (or nearly). The required lots of careful measuring and checking, more than the usual adage of measure twice and cut once. Then squaring off to end up at 22 inches plus seam allowance.

I have not put fabric with canvas work before in this way, so in the end for the first two seams I’d ended up doing five rows of stitching to get it right. I’ve got used to quilting where the pieces are the same size and the seam allowance comes off both sides, so I’d not allowed the seam allowance to add the long strips! Also I wanted the seam to be right next to the canvas work stitches and the first seam wasn’t quite close enough. So three unpicked seams! I’ve spent so much time on the canvas work I didn’t want to spoil the whole thing but not making it up well.

I’m not sure if readers think I am just totally incompetent or whether it’s reassuring that others make mistakes too!

20140716-162621-59181974.jpg

For the back I decided  to put in a zip. Yes, it’s a bit of a pain, but all the other methods I’ve tried, overlaps, buttons etc., have their disadvantages too, especially with over stuffed cushions.

I know that my old needlework teacher Mrs Hirons would turn in her grave if she saw the way I did it, but it seems an easier way to get an even seam overlap putting in what should be the second row of stitches first on a flat piece of fabric (and working upside down!). Then putting the other piece of fabric up close to the zip and stitching from the right side. These stitches are completely hidden by the flap so are much less noticeable if they are not quite straight. They are straight though I pleased to say. Looking at it I’m sure Mrs Hirons would have said it was a well put in zip, if she hadn’t know I hadn’t done it correctly. Also I committed another sin, I didn’t tack. Hence the unpicking on some of the seams!

20140716-162622-59182282.jpg

20140716-162622-59182711.jpg

Made up ready for the cushion, not pressed, nor trimmed inside, just in case anything needed altering I’d not burnt my boats.

20140716-162623-59183052.jpg

It fits, it’s worked, it just needs taking out and cutting off the excess fabric and the corners snipping off (see bottom left).

20140716-162624-59184467.jpg

Finished at last. Looks better square in the chair, but will probably be mainly used as a floor cushion. I’ve realised as I’ve written that I haven’t taken any close up photos of the making up. I can’t at the moment as it’s been borrowed to put in a display of work by the Market Rasen group that I go to. If anyone wants to see close-ups let me know and I take some when I get it back in a few weeks time.

20140716-162624-59184201.jpg