This is what we have been working on at “In the stitch zone” with Alex Hall at Scunthorpe Library. I have done very little blackwork previously, a couple of little pin cushions, but that’s about all.

I’m not good at counted work, too easily distracted and lose my place in the pattern. I also find working black on white hard on my eyes and, with the high contrast, prone to trigger migraines.

All the same, having seen the start of Alex’s piece I was keen to have a go. We were to use coloured thread rather than black, and a suggestion of working on 14 count Aida. I decided to base my palace on Neuschwanstein, a wonderful castle that we visited with our German friends when camping in the Black Forest many years ago, unfortunately before digital cameras.

When we went to Neuschwanstein, it was a glorious morning, so I decided to use a pale blue linen rather finer than Aida (first mistake) for the background.

Last minute before the first class, I machine stitched round the edge of 8 by 9 inch fabric to stop it fraying as I worked. I used a zigzag stitch, first two sides ok, then something jammed up. Bobbin? Fraying edge? Soon a case of more haste, less speed, but eventually I got it sorted out with tweezers and scissors and quite a bit of tugging.

Once I got to class, I tacked in a centre line both horizontally and vertically, which showed part of the machining problem: the fabric was nowhere near square. Fortunately it is big enough, and can be stretched and mounted square when I eventually reach that stage.

I have a bundle of Paintbox threads that I bought years ago, which I have sat and stroked a few times, but didn’t want to break in to.

I finally have done, using the middle darkest blue for the outline. I’m using running stitch and will go back round to fill in the gaps. The scrappy sketch at the top is what I’m working with, and making the size of the shapes by eye.

By the end of the first session, I’d got a door!

I had hoped to draw up a scale(ish) pattern by the following session, but didn’t get to it. So I continued with the scrappy sketch, using the door for proportion.

Alex had given us a couple of sheets with turrets, arches, windows, etc., which helped for my triangle at the top of the tower.

I then started putting in a turret. The slight curve didn’t work, so a bit of unpicking, much easier with running stitches than back stitch. After a couple of attempts trying to work it out, Alex advised doing a straight line as everything else is straight lines.

It immediately looked better, but by the end of the second session I’d only got to here.

I’ve had a couple of short sessions since. It’s hard on the eyes even with my strong glasses on, much easier to count running stitches than back stitches …..

……for mirror-imaging the bits that need it. I’m working in a hoop at the moment to make this bit easier, by seeing it all at the same time, but being very good about taking it out each time I finish stitching. And I’ll either attach it to a square frame or work it in my hand, once I’ve done the outine. It’s a slow process and will be a WIP (work in process) for a while.